Disc Golf Rules School - Episode 3: Marking Your Lie
Disc Golf Rules School - Episode 3: Marking Your Lie
![](https://www.pdga.com/files/styles/homepage_carousel/public/rules_school_-_hero3_ytt.png?itok=yDlaq3mc)
The Lie
Every shot in disc golf is thrown from a lie (802.05). Put simply, the lie is the designated area of the playing surface on which a player must establish their stance in order to throw.
There are two types of lies specified by the Official Rules of Disc Golf: teeing areas and marked lies. Drop zones can be treated either like a teeing area or played in the same manner as a marked lie, depending on how it is designated by the Event Director.
Teeing areas (802.04) mark the beginning of each hole and can be defined in one of two ways: either as the area bounded by the edges of a tee pad, if provided, or as the area extending three meters perpendicularly behind a designated tee line.
Marked lies, on the other hand, comprise a much smaller area. The area of a marked lie is defined as a rectangle that is 20cm wide and 30 cm deep —about the size of a piece of notebook paper— centered on the line of play behind the rear edge of the marker disc.
A marked lie is an area, 20 cm wide by 30 cm deep, behind the marker disc and centered on the line of play. [Click to expand]
The line of play is an imaginary line on the playing surface extending from the center of the target through and beyond the center of the marker disc.
Note: The definition of the line of play has changed with the 2022 rules update. Previously, the line of play extended from the marker disc to the nearest mandatory object, if present, but as of 2022 the line of play does not change regardless of the presence of mandatories.
The Line of Play is used to determine the location of the lie (where you put your foot when throwing), as well as influences how to take relief, when applicable. [Click to expand]
Marking the Lie
When a throw lands in-bounds on the playing surface, the thrower has the option to use the thrown disc at rest as their marker disc or to use a mini marker, placed on the playing surface touching the front of the thrown disc on the line of play.
Check out our complete PDGA Rules School Video Series on YouTube »
In Episode 3: Marking Your Lie, host Sarah Hokom discusses the various types of lie and explains how to mark your lie on the fairway according to the Official Rules of Disc Golf section 802.05.
In other scenarios, like when the disc goes out of bounds or is otherwise not on the in-bounds playing surface, or when the lie has to be moved by rule (e.g., casual relief, relief from OB), then the lie must be marked with a mini marker disc.
For this reason, every player should bring a mini marker disc that complies with the PDGA Technical Standards. Mini Marker discs must have a circular shape, with a diameter ranging from 7 cm to 15 cm and a height not exceeding 3 cm, and can be made from a variety of materials (e.g. plastic, metal, wood).
Throwing from a lie that has not been marked according to these rules results in a marking violation. A player receives a warning for the first marking violation, and one penalty throw for each subsequent violation of any marking rule during the round.
Note: Disc flipping is not allowed! Oftentimes casual players will flip-over their thrown disc at rest in order to simulate marking the lie with a mini marker. This is not allowed in sanctioned play. If you don’t have a mini marker disc, then you must play from the thrown disc at rest as it lies, and—as noted above—you will almost certainly run into scenarios where there is no legal way to mark your lie.
Extra Credit: When Not to Use a Mini Marker
Even when you have a mini marker disc at the ready (and you should!), there are scenarios where it may be advantageous to leave it in your pocket and use the thrown disc at rest as your marker disc.
In some cases, it may be easier to see the larger disc on the ground if you are taking a big run-up to throw your next shot, or you may just prefer not to fuss with the mini marker when you don’t have to.
In other cases, the small change in location of the lie between the thrown disc and the mini marker may make a difference in footing, like if your disc lands on a tree root or other obstacle, and by marking it with a mini you would be forced into awkward footing.
[Click to expand]
Lastly, if your throw lands on the edge of the 10-meter circle which defines the putting area, then choosing to mark your lie with a mini may put you inside the putting area, whereas using the thrown disc at rest will keep your lie outside of the putting area, thereby allowing you to use a jump putt or step putt that would be prohibited inside the putting area.
For more information visit the Official Rules of Disc Golf and be sure to check back each Thursday for a new installment of PDGA Rules School.
See you out on the course!
Comments
If the disc lands in front
806.03 Casual Area – To
I'm wondering if you can
The nearest point that
You may only obtain relief if
How does this affect a lie
Bryce;